Tree Felling
Safe, controlled felling of single trees or groups of trees on plots, farms and around buildings.
Civil Engineering & Construction
Site Levelling and Grading
Shaping a plot or yard to the required levels and falls so it is ready for building, parking or drainage.
About Site Levelling and Grading
We level uneven ground by cutting high spots and filling low spots to the agreed levels, and then grade the surface so water drains away properly. The work is done with a dozer, grader, excavator or a combination, and compacted where the surface will carry loads.
What we do
- Levels survey and agreement on the target formation levels
- Cutting and filling to achieve the design levels
- Grading of surfaces to the required falls for drainage
- Compaction of fill and finished surface where specified
- Re-spreading of topsoil where requested
- Final level check against the agreed levels
What we need from you to quote
- Plot size and location
- Topographic survey or approximate existing slope
- Required finished levels or intended use of the area
- Soil type and any known problems such as black cotton soil or rock
- Access for heavy plant
- Required completion date
Related
More in Civil Engineering & Construction
Tree Stump Removal
Digging out and removing stumps and major roots left after trees are felled or cleared.
Stump Grinding
Grinding tree stumps below ground level so the area can be levelled, landscaped or planted without digging.
Topsoil Stripping and Stockpiling
Careful removal and storage of fertile topsoil before construction, so it can be reused for landscaping or farming.
Bulk Earthworks and Cut-and-Fill
Large-scale excavation, hauling and filling to form platforms, embankments, estates and industrial sites.
Land Reclamation and Backfilling
Filling and raising low-lying, swampy, quarried or eroded land so it can be built on or farmed.
Have a project in mind?
Send your scope, drawings or a bill of quantities and our engineers will respond with a clear proposal.